I did and the coupling was a 4 to 6 week wait (might have been months) and I needed the SKF tool to remove the old one. So I found the SKF tool...
So i have found an SKF oil injection tool to do the job (but of course, necessity has the old damper plate and transmission already cleaned up and...
Probably not but the rubber is disintegrating
So I am still looking for this part, and a SKF oil injection tool - which is next to impossible to find locally
Not to derail this thread, but what engine is he running and is it a pilot house or a flybridge model - maine coaster
will try the redneck test as you put it.......and the blowby test as well
On test running the engine, there was some exhaust (or fumes) seen coming out of the crankcase breather.
Is this normal.......asking for a friend?
The how long have I been boating seems irrelevant to the answer.
Is it good or bad?
Is it time?
Is this bad? (Green deposits on negative)
Is this typical or bad. The green deposits on the end of the negative and the green on the sounder threads?
Couldnt quite find a decent previous post so asking again, looking for a good custom hatch builder for decent prices.
Think I'll need a hatch to...
Thanks for all of the info so far. I am still looking for this part as it is obviously not an on the shelf item but interested to know of a...
Yes on a boat.
My problem now is finding a replacement or equivalent.
This is at the end of a Cummins 6cta 8.3 420hp.....ZF IRM301p.2
The coupling is 11.5 inch radius I believe.
wish you made a long version (at least 66 inches long!!!!)
Second question is, if you note the apparent chip out of the metal in the center of the picture, what are common causes of that? First comes to...
Got some answers already!!
However, if someone has a lead on a source [US only] for this part, I would be most appreciative.
I am joining this...