mcangelo41
1st Mate
saw this on deadrise...dunno if you guys saw it...please delete thread if so...
Contact Us
[FONT=Helvetica, Arial, sans-serif]Mitchell Cove with 2011 315 Cummins with only 1587 hours, Twin-disc transmission, has 1 3/4 inch shaft, with a 24x26 four-blade wheel. The [/FONT][FONT=Helvetica, Arial, sans-serif]Kylie Chase[/FONT][FONT=Helvetica, Arial, sans-serif] cruises 16.5 knots at 2200 rpms, turns 2650 rpms and has dual Hydro-slave steening stations with dual Kobalt controls. Boat has shaft driven hydraulics with both a 12 inch and 10 inch hydro slave hauler for either crabpots or lobsters. Electronics include Furuno 1850 chart plotter and 667 Furuno depth finder. Has a Jabsco wash down pump and bus heater. Boat needs nothing, ready for work or pleasure. Recently hauled out and paint and zinced with the last 6 months, also installed when hauled out is a new stainless steel rudder. Please call (252)945-3761 no emails please[/FONT]
Contact Us
[FONT=Helvetica, Arial, sans-serif]Mitchell Cove with 2011 315 Cummins with only 1587 hours, Twin-disc transmission, has 1 3/4 inch shaft, with a 24x26 four-blade wheel. The [/FONT][FONT=Helvetica, Arial, sans-serif]Kylie Chase[/FONT][FONT=Helvetica, Arial, sans-serif] cruises 16.5 knots at 2200 rpms, turns 2650 rpms and has dual Hydro-slave steening stations with dual Kobalt controls. Boat has shaft driven hydraulics with both a 12 inch and 10 inch hydro slave hauler for either crabpots or lobsters. Electronics include Furuno 1850 chart plotter and 667 Furuno depth finder. Has a Jabsco wash down pump and bus heater. Boat needs nothing, ready for work or pleasure. Recently hauled out and paint and zinced with the last 6 months, also installed when hauled out is a new stainless steel rudder. Please call (252)945-3761 no emails please[/FONT]
