2 inch Emt

[Beyond Tom's]

Anybody need any. 2 inch Emt for their boat. Custom bends

 

[F/V First Team]

Could make some dandy boat shelters out of that stuff too, grab a couple of carriage bolts and some shrink wrap and be in business!

 

[tunaorlater]

Could make some dandy boat shelters out of that stuff too, grab a couple of carriage bolts and some shrink wrap and be in business!

Humm great idea

 

[F/V First Team]

Exactly. Do you have the reducer making tool? Do they call it a crimper?

 

[tunaorlater]

I'm not sure what it's called but it's pretty much the same tool beyond toms is using. I borrow it from my job.

 

[tunaorlater]

Here's preshrinkwrap

 

[Madchark]

Was extra footing weight added at the base or did the 2 x stock on end work well with the wind load.

 

[tunaorlater]

2x4's were fine, it was only up for about 6 months through the winter. Around the base everything was bolted to 4x4's then it was all strapped down to the boat when ever there would be weather. A freind took some of it after I was done and that part stayed up for 3 years with no issues.

 

[Madchark]

Roger that, thanks.

Todd

 

[Beyond Tom's]

Just use conduit couplings. Set screw with a hex head so u can really tighten them down . You can buy manufactured bends at your local electric supply house