29,32,35 H&H Osmond Beals ????????

BillD

Admiral
Joined
Sep 1, 2011
Posts
8,543
Likes
4,358
Location
Portsmouth NH.. Piscataqua and Merrimack Rivers
Boat Make
27 H&H with Cummins QSB 5.9 480 power
I have a question on the propeller szies for these boats.

Reading the spec sheets on the H&H website...........

The 29 can swing "up to" a 28" wheel

The 32 "up to" a 26" wheel

The 35 "up to" a 26" wheel

My question is...."why the bigger wheel capability on the 29 vs the two bigger hulls" ?
 

gulf_of_maine

Deckhand
Joined
Oct 25, 2011
Posts
43
Likes
0
I have a question on the propeller szies for these boats.

Reading the spec sheets on the H&H website...........

The 29 can swing "up to" a 28" wheel

The 32 "up to" a 26" wheel

The 35 "up to" a 26" wheel

My question is...."why the bigger wheel capability on the 29 vs the two bigger hulls" ?

The reason is due to hull design. Shallow draft verse deep draft. The larger wheel provides better effiency of the power train.
 

gulf_of_maine

Deckhand
Joined
Oct 25, 2011
Posts
43
Likes
0
So I guess the 29 with a QSB 380 or 440 will have cruise capabilities in decent sea conditions to cruise at 22-23 knots??
Yes????
Opinions??

There are more factors including hull speed that have to be concidered when estimating speed. H&H could give you an idea about what to expect.
I'm sure 29 owners would tell you what they have and what the performance is.
 

steveinak

Admiral
Joined
Sep 1, 2011
Posts
6,531
Likes
5,019
Location
Piker Central
Boat Make
31 BHM
I've got a 24x26 on my 29', i'm thinking these shots were taken when it was first built. Anyone have any idea where or what marina this might have been in?
H&H3.jpg

h& H land stern.jpg

H&H4.jpg

h& H land stern.jpg

H&H4.jpg

H&H3.jpg
 

thebridge

1st Mate
Joined
Sep 8, 2011
Posts
126
Likes
11
Vessel: 29 OSMOND
29-Apr-2011

Prepared by
H&H PROPELLER SHOP
1-800-325-0117
For
210 DEERE

Vessel
Vessel typePlaning Length [Overall]29.0 ft
ServicePassenger/Pleasure Weight10000 lb
Water typeSalt Speed/power byAverage hull
Propellers1 Avg. hull mult1.000
Max. diameter26.0 in
Immersion26.0 in
Propeller styleOpen

Engine
Model6068DFM Design power [210 hp]100 %
ManufacturerDeere Power Systems, Design RPM [2650]100 %
Fuel typeDiesel Parasitic loss0 hp
Rated power210 hpGear efficiency0.970
Rated RPM2650
Fuel rate25.4 gal/hr

Sizing
ModelMY-T4 Calc. sizing forTop
ManufacturerHall & Stavert Ltd. Design speed18.7 kts
SeriesGawnAEW Blade area ratio [Keep]0.675
Blades4 Diameter [Keep]26.0 in
Cup typeNone Pitch [Keep]26.0 in
Cup drop0.000 inGear ratio [Keep]2.500
Propeller materialMn Bronze Calc'd max. speed18.7 kts
Shaft angle0.00 deg

Analysis
Speed
[kts]Engine
RPMPower
[hp]Thrust
[lbf]CavitationStrength
18.7 (Top)
16.0 (Cruise)
2650
2356
183
138
2192
1903
OK
OK
OK
OK
 
Top Bottom