Tuckerman
Captain
2004 34' Calvin Beal / South Shore downeast "a la carte" - better than a kit boat!!
So I cannot edit the heading on my original post. Moderators tried too with no luck, so I have made a new thread because of a unique optional way I would like to offer my boat for sale.
This may not appeal to everyone, but I know when I was considering a kit boat I would have loved this option a few boats I looked at. Price a Calvin Beal 34' kit and you will see the value of what I am offering.
I am willing to separate major components of the vessel to help facilitate a sale. Perhaps you have a good engine looking for a suitable boat to put it in, or dont need the tower, or some of the options.
Boat, complete as shown but without engine, reduction gear, Stidd helm chair and Xantrex inverter- $125,000
Boat, complete but without engine, reduction gear ,Stidd helm chair , Xantrex inverter and tower - $115000
Boat is currently untouched and complete and ready to go. Any removals would be done carefully by me only after payment received. May consider a smaller, quality trailerable outboard (Yamaha, Honda, Suzuki, Etec only) boat 2002 or newer with low hours as a partial trade.
Please do not mistake this as a , " fire sale" or anything of the sort. I will not be able to utilize the boat as it should be for the next several years and would prefer not to incur all the storage and maintenance costs for something I cannot use very often. This presents options for potential buyers that may make the boat attainable for them.
2004 34' x 12' South Shore / Calvin Beal finished by Eric Clark of Marine Systems Inc, SW Harbor , ME. Launched 2005. Solid glass hull with composite custom built top/bulkheads. Finish is very high quality. 17knot cruise @ 10 gallons/hr 24 knot WOT.
Boat / engine have a total of 680 hours (will be increasing) since being launched new.
Volvo Penta TAMD 63P/ 400 HP soft mounted to aluminum engine beds. Twin Disc reduction gear.
Wet exhaust.
1.75" stainless Aquamet 22 shaft.
Capilano single ram hydraulic steering.
Stainless rudder
Heavy duty tower by Redman's Marine
4 blade 26 x 27 lh wheel
(2) 100 gallon fuel tanks under deck amidship
High quality "Bomon" aluminum framed safety glass windows (helm window opens)
(4) Freeman aluminum deck hatches
Hynautic hydraulic steering.
Walker Engineering Airsep
(7 ) Swivel rod holders
Custom tuna door
Custom bait and tackle station
Enclosed head with 10 gal holding tank and Y valve.
V-Berths
Sink and freshwater system (23 gallon bladder tank).
Anchor line locker
406 Epirb with new batt and hydro
Revere 4 man liferaft (needs repack)
Raw water washdown
Flow Scan
Algae X
Heater Craft cabin heater
(2) ROCA self parking windshield wipers
Canvas enclosure for wheelhouse.
Upper and lower stations on very high quality tower with (6) rod holders.
Shore power
Xantrex Inverter with (2) AC outlets
SIMRAD 24 autopilot
Electronics:
Sitex 833 color bottom sounder with brand new 1kw transducer
JRC 24 mile radar
Standard Horizon 10" color chartplotter.
(3) Standard Horizon VHF radios
Standard Horizon 6" chartplotter for upper station.
am/fm/cd stereo with (2) speakers
Much more not listed.
This boat turns heads EVERYWHERE and has been kept METICULOUSLY clean and maintained since new. It was built by a long time, highly regarded, professional boat builder as his personal boat, so you KNOW everything was done RIGHT.
Pulpit is not included but can be for an additional $3500.
Replacement value on this vessel is OVER $300,000!!
Many more pics and 2 videos of the boat underway here : captpjt's Library | Photobucket
Attached Images
__________________
MMA Alum
1600T Mate
100T Master
SHELLBACK
So I cannot edit the heading on my original post. Moderators tried too with no luck, so I have made a new thread because of a unique optional way I would like to offer my boat for sale.
This may not appeal to everyone, but I know when I was considering a kit boat I would have loved this option a few boats I looked at. Price a Calvin Beal 34' kit and you will see the value of what I am offering.
I am willing to separate major components of the vessel to help facilitate a sale. Perhaps you have a good engine looking for a suitable boat to put it in, or dont need the tower, or some of the options.
Boat, complete as shown but without engine, reduction gear, Stidd helm chair and Xantrex inverter- $125,000
Boat, complete but without engine, reduction gear ,Stidd helm chair , Xantrex inverter and tower - $115000
Boat is currently untouched and complete and ready to go. Any removals would be done carefully by me only after payment received. May consider a smaller, quality trailerable outboard (Yamaha, Honda, Suzuki, Etec only) boat 2002 or newer with low hours as a partial trade.
Please do not mistake this as a , " fire sale" or anything of the sort. I will not be able to utilize the boat as it should be for the next several years and would prefer not to incur all the storage and maintenance costs for something I cannot use very often. This presents options for potential buyers that may make the boat attainable for them.
2004 34' x 12' South Shore / Calvin Beal finished by Eric Clark of Marine Systems Inc, SW Harbor , ME. Launched 2005. Solid glass hull with composite custom built top/bulkheads. Finish is very high quality. 17knot cruise @ 10 gallons/hr 24 knot WOT.
Boat / engine have a total of 680 hours (will be increasing) since being launched new.
Volvo Penta TAMD 63P/ 400 HP soft mounted to aluminum engine beds. Twin Disc reduction gear.
Wet exhaust.
1.75" stainless Aquamet 22 shaft.
Capilano single ram hydraulic steering.
Stainless rudder
Heavy duty tower by Redman's Marine
4 blade 26 x 27 lh wheel
(2) 100 gallon fuel tanks under deck amidship
High quality "Bomon" aluminum framed safety glass windows (helm window opens)
(4) Freeman aluminum deck hatches
Hynautic hydraulic steering.
Walker Engineering Airsep
(7 ) Swivel rod holders
Custom tuna door
Custom bait and tackle station
Enclosed head with 10 gal holding tank and Y valve.
V-Berths
Sink and freshwater system (23 gallon bladder tank).
Anchor line locker
406 Epirb with new batt and hydro
Revere 4 man liferaft (needs repack)
Raw water washdown
Flow Scan
Algae X
Heater Craft cabin heater
(2) ROCA self parking windshield wipers
Canvas enclosure for wheelhouse.
Upper and lower stations on very high quality tower with (6) rod holders.
Shore power
Xantrex Inverter with (2) AC outlets
SIMRAD 24 autopilot
Electronics:
Sitex 833 color bottom sounder with brand new 1kw transducer
JRC 24 mile radar
Standard Horizon 10" color chartplotter.
(3) Standard Horizon VHF radios
Standard Horizon 6" chartplotter for upper station.
am/fm/cd stereo with (2) speakers
Much more not listed.
This boat turns heads EVERYWHERE and has been kept METICULOUSLY clean and maintained since new. It was built by a long time, highly regarded, professional boat builder as his personal boat, so you KNOW everything was done RIGHT.
Pulpit is not included but can be for an additional $3500.
Replacement value on this vessel is OVER $300,000!!
Many more pics and 2 videos of the boat underway here : captpjt's Library | Photobucket
Attached Images
__________________
MMA Alum
1600T Mate
100T Master
SHELLBACK
