35 foot five islands 420hp cat 3126

[riskybusiness]

1995 35' Five islands(bruno) tuna rigged 420hpcat

1995 Five Islands 35', rigged for tuna fishing, 3126 Cat 420hp rating, approx. 7500hours, 22 kts WOT, 14kts at 1900 Fully refit in 2011/12, 10 zero degree swivel rod holders, new wheelhouse, deck, raised gunwales boxed in with storage in stern, deck stringers, wet exhaust out the side, all new wiring, all new hydraulic lines , power steering, new aluminum framed windows, stainless handrails, split wheelhouse but only one helm, finished forward all new cushions, 14" s/s hauler, custom new s/s davit, dayberth /bench in back of wheelhouse, offset mast with boom, all LED lighting/running lights. Poly planar stereo, icom m422 and icom m304 Vhfs, Furuno open array radar,new Furuno FCV-585 sounder w/ 1kw transducer, Garmin 740s plotter, 2, 400watt Rab floodzillas, 2, 150 watt Rab floods, on removable upper mast section... 8 Man Solas A pack raft repacked in june, new Epirb, 7 survival suits, brand new 50+mile flare kit . All safety gear current, will have new 100+nm coast guard sticker before sale. all surfaces new gel coat, and hull is awlgripped. Boat is currently in water and fishing in Portland maine,

i know its a cape cod craigslist, the boats also on maine craigslist i just found a few better pictures for this ad, the boat is currently located and fishing out of Portland Maine, i hate that im selling this boat but i have to oppertunity to upgrade to a larger boat so i probably should while i can, i love this boat and it is awesome riding and am very happy with it just cant keep it if i am going to upgrade....

 

[CCtuna]

I love this boat. It is set-up perfect for tuna fishing, I would buy it site unseen if i wasnt a broke 19 year old. Any chance you have a pic with it all lit up??

 

[Sparky]

Are the christmas lights included?

 

[riskybusiness]

can be for the right price......infact I would even go buy new ones....cuz I threw those ones out....

 

[riskybusiness]

couple more a friend of mine took out fishing

 

[riskybusiness]

bump.......................................

 

[tailhook]

nice looking ride!!!

 

[riskybusiness]

thanks man, I love it I hate to even think of selling it just have the opportunity to do something bigger and have some way to subsidize it a little and make money all winter, so probably should while I can....if not I'll keep fishin the old girl I do love it

 

[worldcat2005]

nice rig....!!!! how long have you owned her??

 

[riskybusiness]

like 2.5 years but spent a year and a half re doing it.... have had it in the water for like a year now....

 

[Goodbye]

Like your boat. I'm refitting a 40' Young Brothers and was wondering what you used for your rub rail? Good luck with the sale and upgrade.

 

[riskybusiness]

its just the heavy dury pvc extrusion from Hamilton marine part # 973-R
if u can use white instead of the black ones the white lasts a lot longer.....doesn't get as hot and therefore less brittle over time

Like your boat. I'm refitting a 40' Young Brothers and was wondering what you used for your rub rail? Good luck with the sale and upgrade.

 

[riskybusiness]

bump....and reduced to 74 k if anyone was interested.....

 

[outcastcharters]

Nice Rig. Do you have another picture of the wheelhouse? Would like to see more of the helm area and electronics. Thanks.

 

[JoeD]

Nice Rig. Do you have another picture of the wheelhouse? Would like to see more of the helm area and electronics. Thanks.

Times two, I'd like to see the interior. Thanks

 

[riskybusiness]

only found a few pics...I know I have more just gotta find em on the computer...absolutely no idea where though......

 

[riskybusiness]

a few more

 

[WC1966]

Nice neat job on the wiring layout! And labels too, someone thought this out. I see this and think that the other maintenance issued aboard are going to be addressed with the same meticulous care.

 

[riskybusiness]

thanks! yah that label maker is about the best investment one can make it was like 30 bucks at sams club and a 3 pack of tape was another 30 bucks its been 2 years and I still have a pack of tape left for it.... I cant stand looking at a breaker then going around to the other side of the panel and having to guess which one it is....so much easier to spend 5 mins and just label everything. I try to label anything on the boat we did it on the longliner I was on in Alaska and It saves so much time in the course of your day....also if you ever have an emergency and tell someone to go shut something off or do something the labels make it doable without knowing how everything on the boat is rigged.... plus just labeling when all your safety gear expires, up in the wheelhouse I have labels with when all the safety gear needs batteries or re pack...cg phone number incase u ever have to call them and the radio doesn't work and just random phone numbers I always need and cant remember(mmm pizza) ....also really handy for labeling part #'s and wrench sizes/ adjustments on the engine.... I went to school for marine systems and worked as a shore engineer for a number of years so I got sick of dealing with other peoples lack of caring on how stuff was set up to be serviced....its a lot easier if you lay the boat out around having to work on it....like when I put the new deck stringers and risers in I made sure they weren't in the way of getting at anything on the engine so if you have to tear something apart you can get in there and get a wrench on it easily which is really nice you can get down below the deck easily (im 6'4" and can do it) and reach right over to get at most anything on the engine...

Nice neat job on the wiring layout! And labels too, someone thought this out. I see this and think that the other maintenance issued aboard are going to be addressed with the same meticulous care.

 

[CCtuna]

This thing could fill in as the goddamn nantuckt light ship. I love that light tower/mast/boom.