Make: Osmond Beal 38’ x13’3”
Power: Cummins QSC 8.3 @600HP 1,733 original hours
100% interested Posted interest , sent PM no response yet . Was hoping to come up today .
Performance: 10 kts @5 GPH 20% load
14 kts @11 GPH 39% load
17.2 kts @16.5 GPH 54% load
19 kts @ 23 GPH 80% load
21.4kts @ 32 GPH 95% load WOT
Transmission: Twin Disc 5075 MG 2:1 mechanical shift
Prop: 26” x 25” fresh tune and MRI from Nautilus Marine
Drive line: 2” shaft, RE Thomas Dripless with self aligning shaft seal, HD stern bearing
Steering: two stations, Dual ram stainless with stainless rudder
Fuel: 4 tanks, 500+ usable gallons
Electrical: 3- 8D batteries, Mastervolt 3 bank smart charger, Xantrex inverter, Blue Seas panel
Electronics: 12” Simrad NSS EVO 3 display, Simrad 4G radar, Furuno 295 sounder, airmar ss275 double wide transducer, Simrad AP 44 auto pilot control, Icom 506 VHF, Yaseu VHF
Lighting: all LED, 2 mast lights, 2 light bars ports and starboard, 1 led deck light, Diamond Seablaze underwater lights, LED rope lighting in lazz, Imtra interior
Fish holds: 2 holds each 42”x 32” x 108” - easily fit 4 giants under deck.
Fishing equipment: Green stick with bandit reel and all the drops, HD outriggers, 12" hauler, 7 x J&L deep 11” swivel rod holders, 2 x 9” shallow swivels, 4 x 15 degree shallow swivels, Custom Tackle center.
Accommodations: Stidd slimline helm chair, large v birth forward, pantry, head, daybunk up
Safety Equipment: Solas A 4 man offshore raft, ACR cat II auto EPIRB, 4 Survival suits
Sound Down: 4” insulation with perf aluminum in engine room, headliner, carpet underlayment
View attachment 91630 View attachment 91631 View attachment 91632 View attachment 91633 View attachment 91634 View attachment 91635 View attachment 91636 View attachment 91638 View attachment 91637 View attachment 91639
The boat is in my harbor and is a talented guy. He stretched the boat a couple feet and by all accounts you cant really tell from the outside at least. If you are struggling to get in touch with him let me know and I will reach out to him. He is in the boat buisness so I am sure he is straight out this time of year.
And there isn’t an H&H mold that is 38’ long by 13’3” wide. It looks like the H&H 36’ stretched to 38’, but that question has not been answered either. The guy listing it kept out some important information, good luck