Aver Girth of a BFT

[Reelaction]

So I am trying to see what everyone thinks the aver girth of a 85 in tuna is. My guess was about 60 inches. Anyone have an info on lenth and girth. I am trying to decide if building a fish hold is worth it since I do not have much beam to work with in the area I am consdiering inatalling it. I think an 85 inch fish is a lage as I am going to fit.

 

[googinhater]

Go for it it you have a 90 inch fish with head off and two foot buy two foot you'll be good I'd rather see 30x30 but go for it

 

[MDI45]

I would say you need 28 inch wide ...Thats going by a avg tuna door..

 

[F/V First Team]

I don't know about the tuna in the water, but the whales at Wal*Mart...

Best be getting the harpoon...

 

[VPC]

Bmw

big maine women

 

[Crabman]

Go for it it you have a 90 inch fish with head off and two foot buy two foot you'll be good I'd rather see 30x30 but go for it

2' x 2' is good if you want to save the head.

 

[hntrss]

I think if you could measure the coffins they ship them over in you may be surprised how narrow you can get away with. Mine was about 4 inches wider than a fish tote long ways, was only restricted by length, never width. Fish up to 680 dressed fit in no problem, bigger than that they were too long. That, my friend, is a good problem to have..

 

[googinhater]

The big box they ship in is 26 high and the same wide

 

[googinhater]

I know we had a box on Jr boat that was 4 feet wide 4 tall and 8 long and could get 3 drested head off fish in that dressed 450+