Heritage Marine Bristol, RI

[TAftw]

Hey guys, I’ve made some posts and had people messaging me about some of the services I offer with my business Heritage Marine. I’ve worked on quite a few forum members boats so Bill told me to make a thread on it so I can answer questions anyone has.

I’m in Bristol, RI and do mobile media blasting all over New England. I specialize in boats but also do lots of equipment, truck frames, dump bodies, etc.

I generally don’t blast when it’s freezing cold so in the winter I do fiberglass and general marine repair.

Currently in the yard I have some deck hatches that need new cores, a 31 JC that’s getting an extensive refit- decks, livewell, fresh Awlgrip, etc, a center console that needs a new transom, and another one that’s coming in for a new fuel tank and decks. Boat blasting is starting to pick up so in another few weeks I’ll be back on the road doing that.

I’m also a northeast dealer for Mate USA, they’re a Florida based company that sells rubrails, pumps, and signal horns. If anyone needs anything for a project I’m always available to place an order. Mate USA

I’m always available for calls or texts through here or Facebook, and my Instagram is @Heritage_Marine.

James

 

[TAftw]

More pics sorry about the order being messed up

 

[Tcsteenjr21]

Definatley give James a call before the next guy does! He has done lots of work on Mystery, my 35' JC "running" restoration over the past several seasons. Including but not limited to: bottom sandblasting, pulling/blasting/painting my 3208, composite panel fabrication for a new winter back, blasting/painting an aluminum radar stand, various electrical/systems work, and an in-water emergency repair to my engine on July 4 weekend. He is punctual, professional and his work is top notch, and he is competetively priced. Additionally he shrink wraps my boat each season. Great dude to work with.....Can't say or thank him enough!

~Cj~

 

[TallTailz401]

I can personally vouch for James and heritage marine. He's done some blasting, glass and finish work for me. Very professional and reasonably priced. Don't hesitate to reach out guys

 

[CMEBoston]

James came and media blasted the inside of my Surfhunter and made my life so much easier. I’ve recommended him to multiple buds and they have all been extremely happy with his work.

He’s definitely a professional through and through

 

[Fishonnelsons]

James do you come up to Truro Cape Cod? 38 wesmac and 29 dyer blast the bottoms, right next to each other and both shrink wrapped. PM me please. Thanks

 

[05bill]

Hey guys, I’ve made some posts and had people messaging me about some of the services I offer with my business Heritage Marine. I’ve worked on quite a few forum members boats so Bill told me to make a thread on it so I can answer questions anyone has.

I’m in Bristol, RI and do mobile media blasting all over New England. I specialize in boats but also do lots of equipment, truck frames, dump bodies, etc.

I generally don’t blast when it’s freezing cold so in the winter I do fiberglass and general marine repair.

Currently in the yard I have some deck hatches that need new cores, a 31 JC that’s getting an extensive refit- decks, livewell, fresh Awlgrip, etc, a center console that needs a new transom, and another one that’s coming in for a new fuel tank and decks. Boat blasting is starting to pick up so in another few weeks I’ll be back on the road doing that.

I’m also a northeast dealer for Mate USA, they’re a Florida based company that sells rubrails, pumps, and signal horns. If anyone needs anything for a project I’m always available to place an order. Mate USA

I’m always available for calls or texts through here or Facebook, and my Instagram is @Heritage_Marine.

James

View attachment 154442

View attachment 154443

View attachment 154444

View attachment 154445

View attachment 154446

View attachment 154447

View attachment 154448

View attachment 154449

View attachment 154450

View attachment 154451

You are good to know !!!! Do you do carpentry work as well ?

Thanks,

Bill

 

[CMEBoston]

James do you come up to Truro Cape Cod? 38 wesmac and 29 dyer blast the bottoms, right next to each other and both shrink wrapped. PM me please. Thanks

He did Travis’s Lobster boat last spring

 

[TAftw]

You are good to know !!!! Do you do carpentry work as well ?

Thanks,

Bill

Hi Bill, yes I do carpentry. Send me a PM of you want anything done

 

[TAftw]

James do you come up to Truro Cape Cod? 38 wesmac and 29 dyer blast the bottoms, right next to each other and both shrink wrapped. PM me please. Thanks

Yes I go the the whole outer Cape, I’ll send you a PM.

 

[diesel]

James has been my go to guy for blasting (cars, equipment and boats) and for shrink wrap since I met him 5 yrs ago. He listens. He thinks. He politely offers some good ideas, then he works his balls off. A rare breed.

 

[Sammythetuna]

I hired James to blast the bottom of a project boat I’m working on and he does awesome work. Super easy to work with and got it done quick!

Would recommend to anyone looking for any type of blasting !

 

[Paul Berdy]

James Shrink wraps and hauls my boat every season (22' Walkaround). He has also helped me maintain my trailer, and troubleshoot my systems aboard my 22' walkaround. He is very knowledgabe and delivers top notch service for a fair price.

 

[TAftw]

Never thought I’d have this many responses, thanks so much guys! I’m always free for a call or text for anything you need ! I love talking about boats and different ways to get work done, I’ll keep some pictures coming as I get more jobs coming through

 

[skyeboat]

Agreed. Versatile company, hard worker, good to do business with .