Iso used parts

I'm in search of some good used parts for my 42 Bruno project, I'm looking for a bronze stern bearing housing for 1 3/4" shaft, bronze shaft log with square flange for 1 3/4" shaft, aluminum deck hatch's, stainless helm plates with 3/4" shafts, LD Marine/SMF Marine swivel rod holders. paneltronic AC/DC switch panel and maybe a Sampson post. Call/text or PM me here with what you have. 508-737-6069 thanks Brian

 

Check craigslist in key regions like FL, ME, MA,NC...basically all markets with commercial fleet. I have bought / found tons like that. Also call the used boat part guys in FL...they have lots of stuff that never gets onto their websites.

Good luck.

 

Willy have this new in package $100

MOORING BITT 6.00 X 6.00 S/S

 

Thanks Bill, I'll let you know if i end up going that route.

 

Bump

 

I have a aluminum deck hatch 15 X 24 oval,

 

I will take it.

 

I have some 1 3/4" shaft parts. I'm out of town until Monday, but I'll post what I have when I get home.

 

Field tester, I'm interested, please send pics and info when you can.

 

I'm also looking for 8" exhaust tubing and hose. I probably need about 20'. Also looking for a helm chair, something decent but not expensive.

 

Here is what I have....PSS seal, Spurs, bronze seal (needs to be repacked), and a split coupler from a Twin Disc 507, all for 1 3/4" shaft.

 

Still looking for some 8" exhaust hose/tubing. Ac/DC paneltronics switch panel.

 

Also Looking for 2" and 1.5" thru hulls and valves, 2" sea strainer and racor fuel filter setup.

 

I've got a racor as well as a Parker fuel filter system. Where are you located?

 

Located on cape cod

 

Picked some some 8" hose today but still looking for about 10' or more and a 2" sea water strainer.