Reconditioned FLIR First Mate Handheld Thermal Imagers!

Wharf Rat

Marine Electronics 'Professional'
Forum Sponsor
Joined
Apr 24, 2012
Posts
847
Likes
554
Location
City Island, NY
Website
www.precisionmarinecenter.com
Boat Make
OPB
I just got the bulletin 5 minutes ago, but FLIR has limited supply of reconditioned HM Series hand-held 'First Mate' thermal imagers. These units have video output via RCA, and have other features that vary by model, from 2X Zoom, to High Resolution, to still image capture as well as operating temperatures down to -4 degrees Fahrenheit. There is a limit of two per dealer, and on a first come first serve basis, so I figured I would give everyone here the first crack at getting one of these units on a bargain.

The Models and Pricing Are Below:

HM-224 (Basic 240 x 180 pixel Resolution Model)
$2,125

HM-224 PRO ( Same Resolution as Above, but with 2X Zoom and Still Image Capture)
$2,850

HM-324XP (High Resolution Unit, with 2X Zoom, and Can Operate Below Freezing Down to -4 Degrees F.) * Most Popular Model*
$3,575

HM-324XP+ (Same Features as XP, however provides Still Image Capture)
$4,285

Contact me right away to order, as I said, we can only purchase two cameras total. I did not receive an inventory list, however supply is limited and this is the first time FLIR has ever offered Reconditioned Units before.
If you're interested in finding out more on the First Mate series, check out FLIR's HM Model brochure at the bottom of this post, and feel free to call with any questions.

http://www.flir.com/uploadedFiles/First%20Mate%20Brochure_web.pdf
 

Wharf Rat

Marine Electronics 'Professional'
Forum Sponsor
Joined
Apr 24, 2012
Posts
847
Likes
554
Location
City Island, NY
Website
www.precisionmarinecenter.com
Boat Make
OPB
Yep, anything within the infrared spectrum. THey can switch from white hot to black hot, however they are optimized for use on the water, not for mechanical, electrical or building inspections. For that I would recommend the i-series or b-series.
 
Top Bottom