Replacement Fuel Tanks

tashmoo2

1st Mate
Joined
Sep 2, 2011
Posts
387
Likes
60
Location
Shennecossett Yacht Club Groton CT
Who makes aluminum fuel tanks int the Northeast? My port 130 gallon fuel tank developed a samll hole in bottom and started leaking. It is well ventilated but 32 years old and I want to replace rather than patch.

The original tank was made in Florida. I've read a few tank replacement threads so I think there must be tank fabricators closer.
 

jawz

1st Mate
Joined
Sep 3, 2011
Posts
149
Likes
52
Location
cape may nj
Boat Make
23 sea craft - 31 bertram
Who makes aluminum fuel tanks int the Northeast? My port 130 gallon fuel tank developed a samll hole in bottom and started leaking. It is well ventilated but 32 years old and I want to replace rather than patch.

The original tank was made in Florida. I've read a few tank replacement threads so I think there must be tank fabricators closer.


only one gentleman i use:

patriot marine - waretown nj 609-693-5542


word to the wise - upon reinstalling that tank-follow the advice i've given,concerning properly coating that tank
 

tailhook

Admiral
Joined
Oct 15, 2011
Posts
1,546
Likes
762
Location
buzzards bay
Boat Make
31 JC
luthers welding bristol R.I. ask for bud he did mine on the old boat and all my tanks at work.
 

CEShawn

Admiral
Joined
Sep 21, 2011
Posts
3,331
Likes
1,234
Location
Cape Cod, MA
Boat Make
Downeastless
I used Speedy Tanks, quick turn around, back of the fisherman I think. Was nice and simple to use, great contact with the guys...

A few years ago I picked up a QDX prop, I believe, from NE Propeller. Let me tell you I will have them do my tanks in the future. Great people, the owner I believed showed me the whole operation. I just went to pick a new prop up from them. I was with my 1.5yr old daughter at the time. So he helped carry the prop out to my car, then we were bullshitting, told him about me and Mass. Maritime etc. Then he was like let me show you the operation, I told him not with my daughter as they were all welding. He walked in, everyone stopped welding/grinding and got a tour... Nice people, goes a long way...
 

CaptDave

Commodore
Joined
Sep 13, 2011
Posts
961
Likes
512
Location
MA
Boat Make
31' Eastern w/John Deere 6076 AFM30
I used New England Propeller for both of mine, recommend if putting in a sending unit go with the Weemer

Dave
 


Top Bottom