Twin Radar mount

jerseysportfisher

Rear Admiral
Joined
Feb 13, 2012
Posts
1,181
Likes
149
Location
Communist part of NJ
Boat Make
Bertram 33SF
Normally i don;t post my project because well, i guess you can say i own a bleach bottle, so most stuff don;t belong on this site ;)

But because bill d has been poking around on certain stuff, i started this yesterday because i'm CHEAP, there are no other words for it. I refuse to pay 700+ for a twin mount, so i'm making one, here are the first parts from yesterday, and home depot foam. polyisocyanurate foam, and general layup resin (poly)

radarmount.jpg

radarmount2.jpg

radarhalfglassed.jpg
 

BillD

Admiral
Joined
Sep 1, 2011
Posts
8,089
Likes
3,843
Location
Portsmouth NH.. Piscataqua and Merrimack Rivers
Boat Make
27 H&H with Cummins QSB 5.9 480 power
Normally i don;t post my project because well, i guess you can say i own a bleach bottle, so most stuff don;t belong on this site ;)

But because bill d has been poking around on certain stuff, i started this yesterday because i'm CHEAP, there are no other words for it. I refuse to pay 700+ for a twin mount, so i'm making one, here are the first parts from yesterday, and home depot foam. polyisocyanurate foam, and general layup resin (poly)

radarmount.jpg

radarmount2.jpg

radarhalfglassed.jpg

Appreciated,

Bill D

btw, I own a Clorox bottle too !
 

jerseysportfisher

Rear Admiral
Joined
Feb 13, 2012
Posts
1,181
Likes
149
Location
Communist part of NJ
Boat Make
Bertram 33SF
soon guys, my bad. I actually started a business in the past few weeks, and between that and my 7-4 and lil league with jr , it sits in the shop forgive me ;). However its all glassed, in the fairing phase, and soon ready for spray. I got the notice by the marina if the boats not in the water by the 15th, ill be whacked for summer storage. And that has quite abit of work left. I have not forgot, just spread to thin, you will see updates soon


jim
 
Top Bottom